top of page
PEKK-A+CF15
PEKK+CF15 Ultra Polymer is made using PEKK-A [60/40 copolymer] and 15% high modulus chopped carbon fiber. This polymer is used in a wide variety of end-use applications where exceptional thermal, mechanical, and chemical resistance is required.
Typical applications
Extruder Temp
360-390°C
Bed Temp
120-140°C
Drying Specs
120°C for 4+ hours as needed
Benefits
-
Easier to print than CF PEEK
-
Wide processing window from 360-390°C (ideal), up to 430°C if needed
-
Tg of 160°C, HDT of 150°C, and a Tm of 305°C
-
Inherently flame resistant base resin (UL94 V-0)
-
Base resin with low smoke generation and outgassing
-
Excellent mechanical, thermal, and chemical resistances
bottom of page